The DIY Security Blog

March 16, 2017

ADC-SEM-100-CDMA / ADC-SEM-100-LTE: Installation to Honeywell Vista Systems

Here you will learn how to install the ADC-SEM-100-CDMA / ADC-SEM-100-LTE cellular communicator into Honeywell Vista security systems. Compatible Vista panels are as follows Vista 10p/10psia, 15p/15psia, 20p/20psia and 21ip wired systems. In the past typically Honeywell Vista panels would achieve interactive alarm monitoring services by using their own Total Connect application. Now, customers have another option to add to the list.

The ADC-SEM-100-CDMA / ADC-SEM-100-LTE uses Alarm.com for reporting of alarms and other system events using the CDMA/LTE networks. The SEM is meant to be used as the primary communication path for all alarm signals to our central monitoring station. Once installed and activated the SEM module allows for remote operation by the customer from their smart devices. They will have the ability to access the system at any time from any location. Additional features include viewing system and sensor status/ history, remote arming/disarming, setting up and managing user codes, creating customized email and text notifications for any type of alarm or none- alarm activity at their property. The SEM cellular communicator also supports alarm.com home automation services due to its built in z-wave receiver.

Tools and Supplies needed to complete the Alarm.com SEM installation

• Wire and fuse – Included

• 3 screws for mounting – Included

• Wall Anchors for mounting – Included

• Small flathead and Phillips screwdriver

• Drill and bits – optional

• Four-conductor 22-guage or larger stranded wire

Honeywell Alpha programming keypad  – Recommended for installation

Alarm.com SEM (System Enhancement Module) Monitoring services

Alarm.com SEM Cellular CDMA Communicator for Vista Panels

Alarm.com SEM Cellular CDMA Communicator

Facebooktwittergoogle_plusredditpinterestlinkedinmail

August 20, 2015

2GIG Go!Control: How to Wire the 2GIG-TAKE Hardwired to Wireless Module

Filed under: "DIY",2GIG,2GIG Kits,Hardwired Products,Wireless Systems — Tags: , , , , , , — Brad @ 3:04 pm

This video show’s end users how they can take their existing hardwired contacts, motion detectors, glass break detectors and use them in conjunction with the 2GIG Go!Control wireless security system.

For the lowest No-Term alarm monitoring rates contact GEOARM Security.

Contact: http://www.geoarm.com/contact.html

Product: http://www.geoarm.com/2gig-take-9-wired-zones-takeover-transmitter-module.html

Alarm Monitoring for new or existing systems : http://www.geoarm.com/alarm-monitoring-services.html

2gig takeover module document

Facebooktwittergoogle_plusredditpinterestlinkedinmail

March 10, 2015

The Alarm.com ADC-V820 Indoor Fixed – Dome POE IP Security Camera

Alarm.com V820 Wireless IP Camera

Alarm.com ADC-V820 Wireless IP Camera

The ADC-V820 is Alarm.com’s new vandal-proof IP camera. Made specifically to work with the Alarm.com hosted video service, it provides a professional surveillance solution. HD 720P live and 1280 x 800 recorded videos are available to customers through web-enabled computers, cell phone web browsers and via application on your smart phone. This camera has a learn button on it so if your router has a WPS button then you can just learn this camera into your router without plugging in a Ethernet cable to it. If on the other hand you don’t have a WPS button on your router you will need to temporarily connect this camera to your router to learn the camera into the alarm.com services. This camera is a wonderful addition to any home or business.

For more information and specs on this terrific Alarm.com ADC-V820

Installer manual

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Powered by GEOARM®