2GIG Go!Control: How to Wire the 2GIG-TAKE Hardwired to Wireless Module

This video show’s end users how they can take their existing hardwired contacts, motion detectors, glass break detectors and use them in conjunction with the 2GIG Go!Control wireless security system.

For the lowest No-Term alarm monitoring rates contact GEOARM Security.

Contact: http://www.geoarm.com/contact.html

Product: http://www.geoarm.com/2gig-take-9-wired-zones-takeover-transmitter-module.html

Alarm Monitoring for new or existing systems : http://www.geoarm.com/alarm-monitoring-services.html

2gig takeover module document

Facebooktwittergoogle_plusredditpinterestlinkedinmail

 How does Alarm.com Alarm Monitoring Work?

How Alarm.com and GEOARM alarm monitoring services work?

How Alarm.com and GEOARM alarm monitoring services work.

Alarm.com alarm monitoring is defined by GEOARM Security, as a communication between your existing security system, any smart phone/device and our central station.

Your 2GIG or GE control panel is the “brains” of a network of detectors/sensors, which may include window or door sensors, motion detectors, and/or temperature, flood, and smoke detectors. When your system is armed and any of these detectors/sensors are triggered, an emergency signal is sent to the GEOARM Alarm.com compatible alarm monitoring station via the wireless cellular towers.

The initial signal sent by your Alarm.com compatible control panel will alert monitoring personnel at the GEOARM central station, who will call to notify you and confirm whether it’s a real emergency or a false alarm. If you don’t respond, then GEOARM will contact the proper agency (police, fire, or EMS) to dispatch emergency personnel to your address.

Critical information is sent by your Alarm.com home security system to the GEOARM alarm monitoring center, including account identification (to access your address and contact information) and the type of sensor that has been triggered. For example, a smoke detector event will cause the alarm monitoring service to contact the fire department, while the signal from a medical alert pendant will be routed to ambulance or paramedic services.


Facebooktwittergoogle_plusredditpinterestlinkedinmail

 Alarm.com Image Sensor (ADC-IS-200-LP) – GEOARM

The Image Sensor is a breakthrough product that combines a PIR (Passive Infrared) motion sensor, an integrated still camera, completely wireless communication, and Alarm.com Interactive Services. The Alarm.com Image Sensor offers an entirely new service that is designed to deliver better security through visual verification of alarms and increased engagement through on-demand property views.

The Image Sensor (model ADC-IS-200-LP) is compatible with Simon XTi panels (version 1.0 & up), Simon XT panels (version 1.3 & up), Concord 4.0 panels and requires an Alarm.com module (version 146 & up for XT, 151 & up for XTi, 177 & up for Concord CDMA, 173 & up for Concord HSPA) with an attached Image Sensor daughterboard.

Not only is the image sensor compatible with the wireless GE systems listed above but, it is also compatible with the 2gig go control panel. The only difference in installation is that the you will not need the daughterboard but, you will need to add the 900 mhz transceiver along with the image sensor itself and you will be ready to start capturing images!

  • ETL certified for UL 639 and ULC S306
  • 35 feet by 40 feet detection coverage area
  • Remotely configurable PIR sensitivity
  • Pet immunity, etc.
  • Easy installation
  • Simple panel enrollment
  • No broadband required; No router configuration
  • Tamper detection, walk test mode, supervision
  • Color images
  • Night vision
  • IR illumination
  • Black and white images
  • Wireless image transmission to panel
  • Wireless image transmission to Alarm.com via cellular networks
Facebooktwittergoogle_plusredditpinterestlinkedinmail