How to Install a GSMVLP5-4G in a Honeywell LYNX L5200?


Installation of a GSMVLP5-4G to a Honeywell LYNX Touch L5200 Panel:
The Honeywell GSMVLP5-4G is a 4G cellular alarm communicator powered by AlarmNet service. When you add a GSMVLP5-4G to a Honeywell LYNX Touch L5200 wireless security system, your panel will be able to send all of it’s alarm signals out over the AT&T 4G cellular network. You do need to sign up for AlarmNet service until after you install it into the L5200 control panel.

Please Note:
There is a multi-pin (male to male) connector that must first be inserted into the slot on the circuit board. After this unit is inserted you will find that the 4G GSM unit will perfectly align with the connector and the screw holes on top and bottom. Screw the unit down firmly. Now you can close up the panel and be on your way to activate your cellular based monitoring service with GEOARM!

Once you have installed your GSMVLP5-4G on your LYNX L5200 control panel, you are ready to sign up for GEOARM’s AlarmNet monitoring service. If you are interested in cellular monitoring plans please check out our professional and do-it-yourself Total Connect alarm monitoring services. Feel free to reach out to us at sales@geoarm.com or 877-443-6276 with any further questions.

Facebooktwittergoogle_plusredditpinterestlinkedinmail


You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.