The DIY Security Blog

December 26, 2013

Security Tip: Change Master Code for any DSC PowerSeries Panel

Filed under: DSC PowerSeries,FAQ's — admin @ 4:58 pm
Change DSC PowerSeries Master Code

Change DSC PowerSeries Master Code by GEOARM Security


If you are ever looking to change the master code to your alarm system for a DSC PowerSeries panel, follow these exact steps!

(1.) Press *5
(2.) Enter your Master Code
(3.) Press 4,0
(4.) Enter new 4 digit Master Code
(5.) Press # #

Facebooktwittergoogle_plusredditpinterestlinkedinmail

December 20, 2013

Security Tip: Change Master Code to any Honeywell L3000 or Vista Panel

Filed under: FAQ's,Total Connect 2.0 — admin @ 6:36 pm


If you are ever looking to change the master code to your alarm system for a Honeywell L3000 or Vista alarm panel, follow these exact steps!

(1.) Enter your master code
(2.) Press the numbers 8,0,2
(3.) Enter your new code twice until the keypad beeps
(4.) Enter your old code to make sure it has been removed
(5.) Enter your new code to make sure it arms the system

Facebooktwittergoogle_plusredditpinterestlinkedinmail

December 4, 2013

Security Tip: Change/Add User Code to any Honeywell L5000 or L5100 Panel

Filed under: FAQ's,Total Connect 2.0 — admin @ 7:07 pm


If you are ever looking to add a new user code to your alarm system or simply change your existing code for a Honeywell L5000 or L5100 system, follow these exact steps!

(1.) Press on the “Tools” tab
(2.) Enter your master code
(3.) Press on the “Users” tab
(4.) Press “Add New”
(5.) Edit the Name
(6.) Enter new User Code
(7.) Press the “Save” tab

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Powered by GEOARM®